Operator Comfort
Control pattern change valve allows the machine to be matched to the operator’s preferred operating pattern.
Serviceability
The improved fuel filtration system and use of low sulfur fuel on the TB240 ensures proper engine performance.
Durability
All steel construction on the TB240 protects machine components and ensures longevity in the field.
Performance
The EPA Final Tier 4 engine delivers exceptional power and performance. It features a DOC and DPF exhaust after-treatment system for reduced emissions.
Machine Specs and Dimensions
TB240 Specs
| OPERATING PERFORMANCE | ||
|---|---|---|
| Operating Weight - Canopy | 8,570 lb | (3,890 kg) |
| Operating Weight - Cab | 8,990 lb | (4,080 kg) |
| Maximum Bucket Breakout Force | 9,959 lb | (4,517 kg) |
| Maximum Arm Digging Force | 4,110 lb | (1,864 kg) |
| Arm Length | 5 ft 3.0 in | (1,600 mm) |
| Slew Speed | 9.6 rpm | |
| Traction Force | 9,533 lb | (4,324 kg) |
| Ground Pressure - Canopy | 4.4 psi | (30.2 kPa) |
| Ground Pressure - Cab | 4.6 psi | (31.6 kPa) |
| Travel Speed - Low | 1.8 mph | (2.9 km / hr) |
| Travel Speed - High | 3.3 mph | (5.3 km / hr) |
| HYDRAULIC SYSTEM | ||
| Total Hydraulic Flow | 30.6 gpm | (115.8 L / min) |
| Auxiliary Hydraulic Flow | 17.1 gpm | (64.9 L / min) |
| Hydraulic System Pressure | 3,481 psi | (24.0 MPa) |
| ENGINE | ||
| Make / Model | Yanmar 4TNV88C | |
| Displacement | 133.6 cu in | (2.2 L) |
| Horsepower @ 2,200 rpm | 35.8 hp | (26.7 kW) |
| Maximum Torque @ 1,430 rpm | 102.6 ft-lb | (139.1 Nm) |
| FLUID CAPACITIES | ||
| Engine Lubrication | 7.8 qt | (7.4 L) |
| Cooling System | 9.5 qt | (9.0 L) |
| Fuel Tank Capacity | 18.5 gal | (70.0 L) |
| Fuel Consumption (65% of Full Load) | 1.2 gal / hr | (4.8 L / hr) |
| Hydraulic Reservoir Capacity | 10.8 gal | (41.0 L) |
| Hydraulic System Capacity | 19.5 gal | (74.0 L) |
TB240 Dimensions
| MACHINE DIMENSIONS | ||
|---|---|---|
| Maximum Reach | 18 ft 2.3 in | (5,545 mm) |
| Maximum Reach at Ground Level | 17 ft 9.6 in | (5,425 mm |
| Maximum Digging Depth | 11 ft 4.4 in | (3,465 mm) |
| Maximum Vertical Digging Depth | 8 ft 8.9 in | (2,665 mm) |
| Maximum Dig Height | 17 ft 2.5 in | (5,244 mm) |
| Maximum Dumping Height | 12 ft 6.7 in | (3,828 mm) |
| Front Swing Radius | 6 ft 8.2 in | (2,037 mm) |
| Front Swing Radius with Boom Offset | 5 ft 4.0 in | (1,626 mm) |
| Tail Swing (Slew) Radius | 4 ft 5.7 in | (1,365 mm) |
| Transport Length | 16 ft 8.2 in | (5,020 mm) |
| Transport Height | 8 ft 2.6 in | (2,505 mm) |
| Ground Clearance | 11.6 in | (295 mm) |
| Undercarriage Length | 6 ft 11.0 in | (2,110 mm) |
| Track Width (Rubber) | 13.8 in | (350 mm) |
| Undercarriage Width | 5 ft 8.5 in | (1,740 mm) |
Machine Features
TB240 Features
| ENGINE |
|---|
| EPA Final Tier 4 Emission Compliant |
| DOC+DPF Exhaust After Treatment |
| High Pressure Common Rail Fuel Injection |
| Automatic Fuel Bleed System |
| Dual Element Air Filter |
| Automatic Idle |
| Working Modes: Power and High Altitude |
| Engine Preheat Starting Aid |
| High Capacity Radiator |
| High Capacity Fuel Filters |
| ELECTRICAL |
| LCD Informational Display (canopy) |
| 5.7" Color Multi-Informational Display (cab) |
| Sealed Rocker Switches |
| 12 volt System with 40 amp Alternator |
| Halogen Work Lights: Boom and Side Cover |
| Travel Alarm |
| Horn |
| UNDERCARRIAGE AND FRAME |
| Triple Flanged Track Rollers |
| Automatic Load Sensing 2 Speed Travel |
| High Torque Planetary Final Drive |
| Heavy Duty Dozer Blade with Float |
| Large Wrap Around Counterweight |
| 13.8" Rubber Tracks |
| 13.8" Steel Tracks (optional) |
| Power Angle Blade with Float and Bolt-on Cutting Edge (optional) |
| OPERATOR'S STATION |
| ROPS / TOPS / OPG (ISO 10262 Level 1) Four Post Canopy |
| Deluxe High Back Suspension Seat |
| Adjustable Arm Rests |
| Proportional Slide Switch for Auxiliary Hydraulics |
| 2" Retractable Seat Belt |
| 3" Retractable Seat Belt (optional) |
| Cab with Air Conditioner, Heat, Defrost, Windshield Wiper and Washer, Skylight with Sunshade, AM / FM / MP3 Radio, 12v Power Outlet (optional) |
| HYDRAULIC & WORKING EQUIPMENT |
| Variable Displacement, Open Center Hydraulics |
| High Capacity Hydraulic Oil Cooler |
| Large Hydraulic Reservoir with Fluid Level Sight Gauge |
| Cushioned Boom, Arm, and Swing Cylinders |
| Main Boom Cylinder Guard |
| Hydraulic Pilot Controls |
| Proportional Auxiliary Controls with Detent |
| Adjustable Auxiliary Flow |
| Primary Auxiliary Hydraulic Circuit Plumbed to Arm |
| Multiple Attachment Presets |
| Flow Selector Valve, Primary Auxiliary Circuit |
| Pattern Change Valve (ISO or SAE) |
| Pilot Accumulator |
| Long Arm with Integrated Thumb Mount |
| Dual Pin Position Bucket (optional) |
| Mechanical Bucket Quick Coupler (optional) |
| Main Pin Hydraulic Thumb (optional) |
FEATURES AND BENEFITS
Compact Design
- Enables you to work in a wide range of applications and the conventional tail swing provides greater stability and larger operator’s station.
Peace of Mind
- The safe start system requires the safety lockout lever be in the raised position in order to start the excavator ensuring hydraulic functions are inactive at start-up.
Increased Protection
- All steel construction ensures body integrity through greater strength and rigidity and protects key components from damage.
- Heavy duty counterweight protects vital engine and hydraulic components from damage.
- Triple flange track rollers improve track life by providing greater support, and they feature multiple contact points that reduce the risk of de-tracking.
Operator Focused
- Deluxe high back adjustable suspension seat reduces operator fatigue while providing greater visibility to the work equipment and surrounding job site.
- Multifunction, LED monitor provides the operator with machine vitals, flow adjustments, and attachment presets.
- Electronic dial type throttle control allows the operator to quickly adjust engine speed, and the automatic engine idle feature will reduce engine speed to low idle automatically should the machine idle more than several seconds.
Ease of Maintenance
- Rear hood and right side cover open high overhead providing exceptional access to inspection and maintenance points.
Function and Efficiency
- The variable displacement axial piston pump delivers smooth, harmonized control of the work equipment with no reduction in speed.
- The standard long arm with integrated thumb mount provides you with a wider working range, dig depth, and simplifies thumb installation.
- Load sensing, two speed travel down shifts from low torque/high speed mode to high torque/low speed travel automatically when turning, pushing dirt, or traveling up an incline.
- Large slew bearing provides greater longevity and stability over the life of the machine.
- Cushioned cylinders improve longevity by reducing shock and they reduce felt recoil to the operator for greater comfort.
Takeuchi Fleet Management
- 2 Year Standard Service
- Minimize Downtime
- Remote Diagnostics
- Utilization Tracking
- Proactive Maintenance
- Control Costs
- Geofencing
